بررسی رفتار خمشی رس تثبیت و تسلیح شده

نوع مقاله : مقاله پژوهشی

نویسندگان

1 دانشکده مهندسی عمران، دانشگاه صنعتی خواجه نصیرالدین طوسی

2 دانشکده مهندسی عمران، دانشگاه صنعتی خواجه نصیرالدین طوسی، تهران، ایران.

10.22091/cer.2025.12150.1596

چکیده

در این پژوهش، رفتار خمشی رس تثبیت و تسلیح شده مورد بررسی قرار گرفته است. بدین منظور از رس کائولینیت، آهک با محتواهای وزنی 1، 3 و 5 درصد، الیاف پلی‌پروپین با طول‌های 6 و 12 میلی‌متر و مقادیر وزنی 15/0، 25/0 و 35/0 درصد استفاده گردیده است. نمونه‌ها در محیط آزمایشگاه با دمای 20 الی 25 درجه‌ی سانتی‌گراد به مدت 7 و 28 روز عمل‌آوری شده‌اند. برای ارزیابی‌های کمی و کیفی، به ترتیب آزمایش خمش سه‌نقطه‌ای و میکروسکوپ الکترونی روبشی ‌به کار گرفته شده‌اند. نتایج نشان دادند که تثبیت باعث افزایش مقاومت خمشی و تردی نمونه‌های رس کائولینیت می‌شود، در حالی که تسلیح و تثبیت همزمان، بهبود مقاومت و شکل‌پذیری خمشی را موجب می‌گردد. علاوه بر آن، یافته‌ها نشان دادند که تقویت مقاومت خمشی و کرنش در بیشینه تنش، با محتوا و طول الیاف، مقدار آهک و زمان عمل‌آوری رابطه‌ی مستقیم دارد. به طور خاص، با افزایش محتوای الیاف از 15/0 به 35/0 درصد، ازدیاد طول الیاف از 6 به 12 میلی‌متر، بیشتر شدن مقدار آهک از 1 به 5 درصد و افزایش دوره‌ی عمل‌آوری از 7 به 28 روز، مقاومت خمشی نمونه‌های تثبیت و تسلیح شده به ترتیب 6 الی 18 درصد، 20-43 درصد، 141-178 درصد و 5-17 درصد بهبود یافته است. به طور مشابه، کرنش متناظر با بیشینه تنش نیز 10-25 درصد، 28-74 درصد، 88-161 درصد و 10-34 درصد تقویت گردیده است. بررسی‌های کیفی نیز مشخص نمودند که الیاف‌ پلی‌پروپیلن اندرکنش موثرتری با رس کائولینیت تثبیت شده دارند.

کلیدواژه‌ها

موضوعات


عنوان مقاله [English]

Assessing Flexural Behavior of Stabilized and Reinforced Clay

نویسندگان [English]

  • Mahmood Reza Abdi 1
  • Elham Abbasi 2
  • Mahdi Safdari Seh Gonbad 2
1 Faculty of Civil Engineering, K.N. Toosi University of Technology, Tehran, Iran.
2 Faculty of Civil Engineering, K. N. Toosi University of Technology, Tehran, Iran.
چکیده [English]

In this study, the flexural behavior of stabilized and reinforced clay was investigated. For this purpose, kaolinite, lime at weight dosages of 1%, 3%, and 5%, as well as polypropylene fibers of 6 mm and 12 mm in length, and weight contents of 0.15%, 0.25%, and 0.35% were utilized. Samples were cured in a laboratory environment at 20-25°C for periods of 7 and 28 days. For quantitative and qualitative evaluations, three-point bending tests and scanning electron microscopy were employed. Results indicated that stabilization increased the flexural strength and brittleness of kaolinite, while simultaneous reinforcement and stabilization improved both strength and ductility. Furthermore, findings demonstrated that flexural strength and strain at maximum stress are directly related to fiber content, fiber length, lime dosage, and curing time. Specifically, increasing fiber content from 0.15% to 0.35%, fiber length from 6 mm to 12 mm, raising lime dosage from 1% to 5%, and extending curing period from 7 days to 28 days improved the flexural strength of the stabilized and reinforced samples by 6%-18%, 20%-43%, 141%-178%, and 5%-17%, respectively. Similarly, strain corresponding to maximum stress was enhanced by 10%-25%, 28%-74%, 88%-161%, and 10%-34%. Qualitative analyses revealed that stabilization improves interactions at soil-fibers interfaces.

کلیدواژه‌ها [English]

  • Kaolinite Clay؛ Polypropylene Fiber؛ Lime؛ Three-Point Bending Test؛
  • Curing
CAPTCHA Image