[1] Aladejare, A. E. (2020). “Evaluation of empirical estimation of uniaxial compressive strength of rock using measurements from index and physical tests”, Journal of Rock Mechanics and Geotechnical Engineering, 12(2), 256-268.
[2] Azimian, A. (2017). “Application of statistical methods for predicting uniaxial compressive strength of lime-stone rocks using nondestructive tests”, Acta Geotechnica, 12(2), 321-333.
[3] Ghobadi, M. H., Amiri, M., & Aliani, F. (2020), “Investigation of engineering geology characteristics of peri-dotites (Case Study: Harsin County, Kermanshah Province)”, Journal of Engineering Geology, 14(1), 105-132.
[4] Ghafoori, M., Rastegarnia, A., & Lashkaripour, G. R. (2018). “Estimation of static parameters based on dy-namical and physical properties in limestone rocks”, Journal of African Earth Sciences, 137, 22-31.
[5] Jamshidi, A., Nikudel, M., Khamehchiyan, M., Zarei Sahamieh, R., & Abdi, Y. (2016). “A correlation be-tween P-wave velocity and Schmidt hardness with mechanical properties of travertine building stones”, Arabian Journal of Geosciences, 9, 568-580
[6] Selçuk, L., & Nar, A. (2016). “Prediction of uniaxial compressive strength of intact rocks using ultrasonic pulse velocity and rebound-hammer number”, Quarterly Journal of Engineering Geology and Hydrogeology, 49(1), 67-75.
[7] Barham, W. S., Rabab’ah, S. R., Aldeeky, H. H., & Al Hattamleh, O. H. (2020). “Mechanical and physical based artificial neural network models for the prediction of the unconfined compressive strength of rock”, Ge-otechnical and Geological Engineering, 38(5), 4779-4792.
[8] Abdi, Y. (2020). “Application of multivariate regression analysis to predict uniaxial compressive strength and modulus of elasticity of sandstones using petrographic properties”, New findings of applied geology, 14(27), 147-157.
[9] Ebrahimi Fard, H., & Jabbari, M. M. (2017). “The Effect of Magnesium Oxide Nano Particles on the Me-chanical and Practical Properties of Self-Compacting Concrete”, Journal of civil Engineering and Materials Application, 1(2), 77-87.
[10] Mishra, D. A. & Basu, A. (2013). “Estimation of uniaxial compressive strength of rock materials by index tests using regression analysis and fuzzy inference system”, Engineering Geology, 160(1), 54-68.
[11] Armaghani, D. J., Amin, M. F. M., Yagiz, S., Faradonbeh, R. S., & Abdullah, R. A. (2016). “Prediction of the uniaxial compressive strength of sandstone using various modeling techniques”, International Journal of Rock Mechanics and Mining Sciences, 85, 174-186.
[12] Abdi, Y., & Khanlari, G. H. (2019). “Estimation of mechanical properties of sandstones using wave veloci-ty and Schmidt hammer experiments”, Journal of New Applied Geological Findings, 24(13), 33-47.
[13] Bejarbaneh, B. Y., Bejarbaneh, E. Y., Fahimifar, A., Armaghani, D. J., & Abd Majid, M. Z. (2018). “Intelli-gent modelling of sandstone deformation behavior using fuzzy logic and neural network systems”, Bulletin of Engineering Geology and the Environment, 77(1), 345-361.
[14] Moradian, Z. A., & Behnia, M. (2009). “Predicting the uniaxial compressive strength and static Young’s modulus of intact sedimentary rocks using the ultrasonic test”, International Journal of Geomechanics, 9(1), 14–19.
[15] Kılıç, A. & Teymen, A. (2008). “Determination of mechanical properties of rocks using simple methods”, Bulletin of Engineering Geology and the Environment, 67(2), 237-244.
[16] Erguler, Z. A., & Ulusay, R. (2009). “Water-induced variations in mechanical properties of clay-bearing rocks”, International Journal of Rock Mechanics and Mining Sciences, 46(2), 355-370.
[17] Vásárhelyi, B. (2005). “Statistical analysis of the influence of water content on the strength of the Miocene limestone”, Rock Mechanics and Rock Engineering, 38(1), 69-76.
[18] Török, Á. & Vásárhelyi, B. (2010). “The influence of fabric and water content on selected rock mechanical parameters of travertine, examples from Hungary”, Engineering Geology, 115(3), 237-245.
[19] Vásárhelyi, B. (2003). “Some observations regarding the strength and deformability of sandstones in dry and saturated conditions”, Bulletin of Engineering Geology and the Environment, 62(3), 245-249.
[20] Azimian, A., & Ajalloeian, R. (2015). “Empirical correlation of physical and mechanical properties of marly rocks with P wave velocity”, Arabian Journal of Geosciences, 8(4), 2069-2079.
[21] Yasar, E., & Erdogan, Y. (2004). “Correlating sound velocity with the density, compressive strength and Young's modulus of carbonate rocks”, International Journal of Rock Mechanics and Mining Sciences, 41(5), 871-875.
[22] Khandelwal, M. (2013). “Correlating P-wave velocity with the physic-mechanical properties of different rocks”, Pure Applied Geophysics, 170, 507-514.
[23] Altindag, R. (2012). “Correlation between P-wave velocity and some mechanical properties for sedimen-tary rocks”, Journal of the Southern African Institute of Mining and Metallurgy, 112, 229-237.
[24] Edet, A. (2018). “Correlation between Physico-mechanical Parameters and Geotechnical Evaluations of Some Sandstones along the Calabar/Odukpani–Ikom–Ogoja Highway Transect, Southeastern Nigeria”, Ge-otechnical and Geological Engineering, 36(1), 135-149.
[25] Heidari, M., Rafiei, B., Nouri, M., Khanlari, G. R., & Momeni, A. A. (2015). “Estimation of uniaxial com-pressive strength and modulus of elasticity of conglomerate specimens using regression and artificial neural network”, geotechnical geology (applied geology), 10(1), 35-46.
[26] Kurtulus, C., Bozkurt, A., & Endes, H. (2012). “Physical and Mechanical Properties of Serpentinized Ultra-basic Rocks in NW Turkey”, Pure and Applied Geophysics, 169, 1205-1215.
[27] Shakoor, A., & Barefield, E. H. (2009). “Relationship between unconfined compressive strength and degree of saturation for selected sandstones”, Environmental & Engineering Geoscience, 15(1), 29-40.
[28] Abdi, Y., Khanlari, G. R. & Jamshidi, A. (2018). “Correlation between mechanical properties of sandstones and P-wave velocity in different degrees of saturation”, Geotechnical and Geological Engineering, 1-10, https://doi.org/10.1007/s10706-018-0721-6.
[29] Vasanelli, E., Colangiuli, D., Calia, A., Sileo, M. & Aiello, M. A. (2015). “Ultrasonic pulse velocity for the evaluation of physical and mechanical properties of a highly porous building limestone”, Ultrasonics, 60: 33-40.
[30] Karakul, H., & Ulusay, R. (2013). “Empirical correlations for predicting strength properties of rocks from P-wave velocity under different degrees of saturation”, Rock mechanics and rock engineering, 46(5): 981-999.
[31] Karakul, H. (2016). “Investigation of saturation effect on the relationship between compressive strength and Schmidt hammer rebound”, Bulletin of Engineering Geology and the Environment, 76(3), 1143-52.
[32] Ansari, Y., & Hashemi, A. (2017). “Neural Network Approach in Assessment of Fiber Concrete Impact Strength”, Journal of civil Engineering and Materials Application, 1(3), 88-97.
[33] Sekhavati, P., & Jafarkazemi, M. (2019). “Investigating durability behavior and compressive strength of lightweight concrete containing the nano silica and nano lime additives in the acid environment”, Journal of civil Engineering and Materials Application, 3(2), 103-117.
[34] Esparham, A., Moradikhou, A. B., & Avanaki, M. J. (2020). “Effect of Various Alkaline Activator Solu-tions on Compressive Strength of Fly Ash-Based Geopolymer Concrete”, Journal of civil Engineering and Ma-terials Application, 4(2), 115-123.
[35] Shirmohammadi, H., & Hoseiny Khanshan, H. (2018). “Effect of Mineral pitch and Zycosil Nano-Material on Mechanical Properties and Moisture Susceptibility of Asphalt Mixtures”, Journal of civil Engineering and Materials Application, 2(2), 97-102.
[36] Taheri, S., & Ziad, H. (2021). “Analysis and Comparison of Moisture Sensitivity and Mechanical Strength of Asphalt Mixtures Containing Additives and Carbon Reinforcement”, Journal of Civil Engineering and Ma-terials Application, 5(1), 1- 8.
[37] Zhang, Z., Jiang, Q., Zhou, C., & Liu, X. (2014). “Strength and failure characteristics of Jurassic Red-Bed sandstone under cyclic wetting–drying conditions”, Geophysical Journal International, 198(2), 1034-1044.
[38] McSkimming, E. (2014). “Weathering Effects on the Engineering Properties of Sydney (Yellow Block) Sandstone when used as a Building Material”, International Journal of Architectural Heritage, 9, 497-509.
[39] Andriani, G. F. & Walsh, N. (2010). “Petrophysical and mechanical properties of soft and porous building rocks used in Apulian monuments (south Italy)”, Geological Society, London, Special Publications, 333(1), 129-141.
[40] Yasar, E., Ranjith, P. G., & Perera, M. S. A. (2010). “Physico-mechanical ehavior of southeastern Mel-bourne sedimentary rocks”, International Journal of Rock Mechanics and Mining Science, 47, 481-487.
[41] Hosseini, M., & Nalbandan, M. (2019). “The effect of wet-drying cycles on the physical, mechanical and rupture properties of sandstone”, Journal of Mineral Resources Engineering, 4(1), 79-95.
[42] Ghobadi, M. H. & Mousavi, S. (2014). “The effect of pH and salty solutions on durability of sandstones of the Aghajari Formation in Khouzestan province, southwest of Iran”, Arabian Journal of Geosciences, 7(2), 641-653.
[43] Ulusay, R., Tureli, K., & Ider, M. H. (1994). “Prediction of engineering properties of a selected litharenite sandstone from its petrographic characteristics using correlation and multivariable statistical techniques”, Engi-neering Geology, 37, 135–157.
[44] Bell, F. G. (1978). “The physical and mechanical properties of the Fell Sandstones, Northumberland, Eng-land”, Engineering Geology, 12, 11-29.
[45] Mikaeil, R., Jalili Kashtiban, Y., Shahriar, K., & Jafarpour, A. (2020). “Evaluation and Management of Geotechnical Risk in Tunneling Projects Using Fault Tree Analysis”, Civil Infrastructure Research, 6(1), 41-53.
[46] Chang, C., Zoback, M. D., & Khaksar, A. (2006). “Empirical relations between rock strength and physical properties in sedimentary rocks”, Journal of Petroleum Science and Engineering. 51(3), 223-237.
[47] Heidari, M., Momeni, A., Rafiei, B., Khodabakhsh, S., & Torabi-Kaveh, M. (2013). “Relationship between Petrographic Characteristics and the Engineering Properties of Jurassic Sandstones, Hamedan, Iran”, Rock Me-chanics and Rock Engineering, 46, 1091-1101.
[48] Wang, S., Hagan, P., Hu, B., Gamage, K., Yan, C. & Xu, D. (2014). “Rock-arch instability characteristics of the sandstone plate under different loading conditions”, Advances in Materials Science and Engineering, 2014.
[49] Weng, M. C. & Li, H. H. (2012). “Relationship between the deformation characteristics and microscopic properties of sandstone explored by the bonded-particle model”, International Journal of Rock Mechanics and Mining Sciences, 56, 34-43
[50] Naresh, K. T., Shuichiro, Y., & Suresh, D. (2007). “Relationships among mechanical, physical and petro-graphic properties of Siwalik sandstones, Central Nepal Sub-Himalayas”, Engineering Geology, 90, 105-123.
[51] Ghobadi, M. H., Rafiei, B., Mousavi, S., & Aria Far, N. (2013). “Study of geotechnical properties of sand-stones of Aghajari Formation in the east and southeast of Ahvaz”, Journal of Advanced Applied Geology, 1, 21-33.
[52] Heidari, M., Rafiei, B., & Taba, H. (2013). “Study of geotechnical characteristics of sandstones of Qom Formation located in Tajrak village (Famenin city)”, 8th Conference of Iranian Geological Society of Engi-neering and Environment, Ferdowsi University of Mashhad.
[53] Gokceoglu, C., & Zorlu, K. (2004). “A fuzzy model to predict the uniaxial compressive strength and the-modulus of elasticity of a problematic rock”, Engineering Applications of Artificial Intelligence, 17, 61-72.
[54] Ghobadi, M. H., & Aria Far, N. (2011). “Possibility of assessing the physical properties of sandstones in Aghajari Formation in Ahvaz using non-destructive P-wave velocity test”, 15th Conference of Iranian Geologi-cal Society, Tarbiat Moallem University, Tehran.
[55] Oshnavieh, D., & Bagherzadeh Khalkhali, A. (2019). “Use of shear wave velocity in evaluation of soil lay-er’s condition after liquefaction”, Journal of civil Engineering and Materials Application, 3, 113-130.
[56] Naseri, F., Lotfollahi, S., & Bagherzadeh Khalkhali, A. (2017). “Dynamic Mechanical Behavior of Rock Materials”, Journal of Civil Engineering and Materials Application, 1(2), 39-44.
[57] Lotfollahi, S., Ghorji, M., & Hoseini Toodashki, V. (2018). “An Investigation into the Effect of
Foliation Orientation on Displacement of Tunnels Excavated in Metamorphic Rocks”, Journal of Civil Engi-neering and Materials Application, 2(3), 138-145.
[58] ISRM. (1981). Rock characterization testing and monitoring. In: Brown, E.T. (Ed.), ISRM Suggested Methods. Pergamon Press, Oxford.
[59] ASTM. (1983). Test methods for ultra violet velocities determination. Designation D2845.
[60] Folk, R. L. (1974), Petrology of Sedimentary Rocks. Hemphill, Austin, 600p.
[61] Taylor, R. (1990). “Interpretation of the correlation coefficient: a basic review”, Journal of diagnostic
medical sonography, 6(1), 35-39.
)
Send comment about this article