ORIGINAL_ARTICLE
بررسی مقایسه ای عملکرد روش المان محدود و مدل تکاملی در پیش بینی برآورد دبی نشت از بدنه یک سد خاکی
یکی از موضوعات بسیار مهم در مورد سدهای خاکی تراوش آب از بدنه و پی سد می باشد که در صورت تجاوز از مقدار معینی منجر به خرابی و شکست سد خواهد شد. در تحقیق کنونی، کارایی روش تکاملی برنامه نویسی بیان ژن (GEP) و روش المان محدود (SEEP/W) در تعیین دبی نشت از بدنه سد خاکی زنوز واقع در استان آذربایجان شرقی مورد بررسی قرار گرفته است. بدین منظور ابتدا با استفاده از داده های سد خاکی زنوز (تراز آب در مخزن سد، سطح ایستائی پیزومترهای کار گذاشته شده در بدنه و پی سد و دبی نشت) مدل هایی در 3 حالت شامل؛ حالت منفرد دبی نشت وابسته به تراز مخزن، حالت منفرد دبی نشت وابسته به تراز پیزومتر و حالت ترکیبی دبی نشت وابسته به تراز مخزن و پیزومتر تعریف شده و نتایج حاصله مورد ارزیابی قرار گرفته است. سپس با استفاده از آنالیز حساسیت موثرترین پارامترها در هر حالت مشخص شده و بهترین حالت بدست آمده از روش GEP، با مدلسازی نرم افزاری با SEEP/W مقایسه گردید. نتایج نشان می دهد که تعیین دبی نشت در حالتی که تنها وابسته به تراز مخزن است منجر به جوابهای دقیقتری می گردد و در این راستا روش برنامه ریزی بیان ژن از روش المان محدود موفق تر می باشد. نتایج آنالیز حساسیت نشان داد که تراز آب مربوط به روز قبل در پیزومتر نصب شده در ارتفاع1850 متری (PL105(t-1)) و تراز آب در مخزن مربوط به دو روز قبل (RL(t-2)) تاثیرگذارترین پارامترها در مدل سازی می باشند.
https://cer.qom.ac.ir/article_1255_8216cf143d29576f87f5c1d0227c2cc1.pdf
2019-02-20
1
15
10.22091/cer.2018.2349.1094
سد خاکی
دبی نشت
تراز آب مخزن
GEP
.SEEP/W
حسن
ثانی
h.sani@tabriziau.ac.ir
1
کارشناس ارشد مهندسی عمران، دانشکده فنی مهندسی عمران، دانشگاه تبریز.
AUTHOR
کیومرث
روشنگر
kroshangar@yahoo.com
2
دانشیار دانشکده عمران دانشگاه تبریز
LEAD_AUTHOR
رقیه
قاسم پور
r.ghasempour93@ms.tabrizu.ac.ir
3
دانشجوی دکتری، دانشکده مهندسی عمران، دانشگاه تبریز.
AUTHOR
[1] Sharghi, A. (2008). Sewage analysis in Sattarkhan dam using artificial neural network and mathematical models. Thesis of Master, Faculty of Civil Engineering, University of Tabriz.
1
[2] Moghadas, M. & Raeisi Estabragh, A. (2012). “Evaluation of Different Methods for Reducing Leakage from Soil Dams (Case Study of Nahrin Dam)”, 2nd National Conference on Structure, Geotechnics and Earthquake.
2
[3] Pakbaz, M. S., Dardaei, A. & Salahshoor, J. (2009). “Evaluation of performance of plastic concrete cutoff wall in Karkheh dam using 3-D Seepage analysis and measurement”. J. of Applied Sciences, 9(4), 724-730.
3
[4] Arshad, I. & Baber, M. (2014). “Finite Element Analysis of Seepage through an Earthen Dam by using Geo-Slope (SEEP/W) software”, J. Res., 1(7), 12-16.
4
[5] Ho, L. & Fatahi, B. (2015). “Analytical solution for the two-dimensional plane strain consolidation of an unsaturated soil stratum subjected to time-dependent loading”. Comput Geotech, 67: 1-16.
5
[6] Khu, S.T., Liong, S.Y., Babovic, V., Madsen, H. & Muttil, N. (2001). “Genetic programming and its application in real- time runoff forecasting”, J. Am Water Res Assoc, 37(2), 439-451.
6
[7] Liong, S.Y., Gautam, T.R., Khu, S.T., Babovic, V., Keijzer, M. & Muttil, N. (2002). “Genetic programming: A new paradigm in rainfall runoff modeling”, J. Am Water Res Assoc, 38(3), 705-718.
7
[8] Whigham, P.A. & Crapper, P.F. (2001). “Modeling rainfall–runoff using genetic programming”, Mathematical and Computer Modeling, 33 (6-7), 707–721.
8
[9] Rabunal, J.R., Puertas, J., Suarez, J. & Rivero, D. (2007). “Determination of the unit hydrograph of a typical urban basin using genetic programming and artificial neural networks”, J. Hydrol. Process, 21, 476–485.
9
[10] Aytek, A. & Kisi, O. (2008). “A genetic programming approach to suspended sediment modeling”, J. Hydro., 351, 288-298.
10
[11] Roushangar, K. (2013). “Intelligent simulation of bridge scouring of bridge bases using evolutional algorithms”, International Conference on Civil Engineering, Architecture & Urban Sustainable Development.
11
[12] Roushangar, K., Valizadeh, R., Ghasempour, R. (2017). Predicting of Hydraulic Jump Characteristics of Sudden Expanding Stilling Basins Using Evolutionary Algoritm. 3(1), 1-15, doi: 10.22091/cer.2017.1293.1056.
12
[13] Tayfur, G., Swiate, D., Wita, A., Vijay, P. & Singh, F. (2005). “Case Study: Finite Element Method and Artificial Neural Network Models for Flow through Jeziorsko Earth fill Dam in Poland”. J. Hydraukic Endineering, 131(6): 431-440
13
[14] Ersayin, D. (2006). “Studying Seepage in a Body of Earth-Fill Dam by (Artificial Neural Network) ANNs”. Department of Civil Engineering Izmir Institute of Technology.
14
[15] East Azarbaijan Regional Water Company. All reports and studies of Zenoz Dam Project. 1993 to 2013.
15
[16] Ferreira, C. (2005). “Gene Expression Programming: A New Adaptive Algorithm for Solving Problems”, J. Complex Systems, 13(2), 87-129.
16
[17] Amin Javaheri, A. R. & Pakniyat. A. (2009). “Static and Dynamic Analysis of Soil Dams Using Geo Studio”, Elme Omran Publishing.
17
ORIGINAL_ARTICLE
ارزیابی هیدرولیکی حرکت سیل و پهنهبندی آن توسط مدلسازی عددی معادله سنت ونانت در رودخانه بستانک
معادلات حرکت جریانهای غیردائمی در آبراهههای روباز معادلات پیوستگی و اندازهحرکت بوده و به معادلات سنتونانت معروف هستند. بر حسب سادهسازیهایی که در این معادلات صورت میگیرد دستهبندی مدلهای روندیابی عددی سیلاب صورت می پذیرد. از جمله روشهای روندیابی سیلاب، مدل های امواج دینامیکی، سینماتیکی و مدلهای هیدرولوژیکی کانوکس و ماسکینگام میباشند. در این تحقیق علاوه بر تشریح اصول معادلات سنتونانت و مدلهای عددی امواج دینامیکی، سینماتیکی و مدلهای کانوکس و ماسکینگام، نتایج مورد مقایسه قرار گرفته است. برای این مهم از بازه رودخانه بستانک بین ایستگاههای هیدرومتری بادامک تا خانیمن در استان فارس بهره برده شد و با ارائه یک رابطه ریاضی نوین با استفاده از خروجی MIKE11 و EXCEL به پیشبینی دبی سیلاب و پهنه سیلگیر رودخانه و بیشینه عرض جریان سیل اقدام گردید. نتایج نشان دادند که مدل موج دینامیکی MIKE11 با اختلاف دبی 044/0 مترمکعب بر ثانیه نسبت به دبی اوج مشاهداتی مقدار دبی حداکثر را با دقت بالایی تخمین زده است و نتایج بهتری نسبت به سایر مدلها دارد. همچنین روندیابی و پهنهبندی ریاضی سیل در میان روشهای هیدرولوژیکی حاکی از نزدیکی نتایج هیدرولوژیکی ماسکینگام به کمک الگوی حداقل مربعات به مقدار 7/14384 متر مربع و کمترین خطا با مقادیر عددی MIKE11 و سیل مشاهداتی بوده است.
https://cer.qom.ac.ir/article_971_22fa6dcaea5b15e63954515667c0a46b.pdf
2019-02-20
17
31
10.22091/cer.2017.1611.1065
بستانک
سنتونانت
MIKE11
روندیابی
بیشینه عرض و پهنه بندی سیلاب
محمد رضا
گودرزی
goodarzi6mr@gmail.com
1
استادیار، دانشکده فنی و مهندسی، دانشگاه آیت الله بروجردی (ره).
LEAD_AUTHOR
امیر
حسینی
eca.hoseini@yahoo.com
2
دانشجوی کارشناسی ارشد عمران، دانشکده فنی و مهندسی، دانشگاه آیت الله بروجردی (ره).
AUTHOR
[1] Safavi, H. (2015), Hydrology Engineering. Isfahan University of Technology, Iran.
1
[2] Stocker, J. J. (1957). Water Waves. Inter Science Publishers .N.Y.
2
[3] Preissmann, A., & Cunge, J. A. (1961). “Calcul du mascaret sur machine électronique”, La Houille Blanche, (5), 588-596.
3
[4] Abbott MB. (1979). Computational Hydraulic. Pitman, London.
4
[5] Corato, G., Moramarco, T., & Tucciarelli, T. (2011). “Discharge estimation combining flow routing and occasional measurements of velocity”, Hydrology and Earth System Sciences, 15(9), 29-79.
5
[6] Timbadiya, P. V., Patel, P. L., & Porey, P. D. (2014). “One-dimensional hydrodynamic modeling of flooding and stage hydrographs in the lower Tapi River in India”, Current Science, 106(708).
6
[7] Song, S., Zheng, X., Li, F., Tian, S., & Lin, G. (2012). “Flood routing simulation and system customization for a high-leakage river channel in China”, Journal of Hydraulic Engineering, 139(6), 656-663.
7
[8] Shultz, M. J., Crosby, C. E., & McEnery, A. J. (2008). “Kinematic wave technique applied to hydrologic distributed modeling using stationary storm events: an application to synthetic rectangular basins and an actual watershed”, Hydrology Days, 116-126.
8
[9] Zahiri, A., Sharifian, H., Tamadoni, S., & Dehghani, A. (2011). "Investigation of the effect of optimization of Muskingum method coefficients in flood routing in composite channel", The First International and the Third National Conference on Dams and Hydropower in Iran, February 6-11, 2011, IRIB International Conference Center, Tehran, Iran.
9
[10] Mirzazadeh, P., Akbari, G., & Ashkani, A. (2014). “Optimal Methods on Hydrologic Flow Routing Operations”, http://www.civilica.com/Paper-NCCE08-NCCE08_0621.html.
10
[11] FRRW, (2000). Hydraulic and hydrology studies of the plan for organizing the river and the branches. Fars Regional Water Authority.
11
[12] Azimian A. (2011). Computational Fluid Dynamics, 4th Edition, Isfahan University of Technology.
12
[13] MIKE 11 a modeling system for Rivers and Channels, (2011), User’s Manual, 11 4.10.
13
[14] Alizadeh (2013) Principles of Applied Hydrology, 26th Edition, Imam Reza University, Mashhad.
14
[15] Aldama, A. A. (1990). “Least-squares parameter estimation for Muskingum flood routing”, Journal of hydraulic engineering, 116(4), 580-586.
15
[16] McCuen, R.H., (2011), Hydrologic Analysis and Design, Prentice -Hall, Englewood Cliffs, New Jersey.
16
ORIGINAL_ARTICLE
مقایسه تحلیلی عملکرد لرزه ای قاب خمشی دسته شده و قاب خمشی ترکیبی میان مرتبه
دراین پژوهش به بررسی عملکرد لرزهای قابهای خمشی میان مرتبه تحت رکوردهای حوزه نزدیک مقیاس شده، با استفاده از تحلیلهای دینامیکی غیرخطی تاریخچه زمانی (NTHA) و افزایشی (IDA) پرداخته شده است. همچنین تبیین مختصر این مفهوم نیز از دیدگاه تشکیل مفاصل غیرخطی بر اساس تحلیل پوش آور مودال (MPA) نیز آزموده شده است. ماهیت انتشار سه بعدی امواج لرزهای ناشی از رکوردهای زلزله در اسکلت مقاوم سازه، سبب ایجاد نیروهای دینامیکی با دامنه مختلف خواهد شد. وجود و اعمال رکوردهای نیرومند حوزه نزدیک می تواند سبب بزرگی و افزایش شدت تاثیرگذاری نیروهای یاد شده گردد. دو سازه مطالعاتی در این تحقیق، با اسکلت قاب خمشی دسته شده (Bundled Tube) و قاب خمشی ترکیبی (3D Frame) میباشند. پارامترهای پاسخ مورد بررسی عبارت از پوش بیشینه دریفت طبقات، بیشینه شتاب طبقات، تاریخچه زمانی دریفت و آرایش مفاصل غیرخطی میباشند. همچنین، منحنیهای IDA متناظر با پارامتر دریفت تحت چند رکورد حوزه نزدیک ترسیم شده است. عملکرد لرزه ای سازه-های مطالعاتی مورد مقایسه و بررسی قرار گرفته است.
https://cer.qom.ac.ir/article_1266_d3ab8359cddc330676cf748c908c81e7.pdf
2019-02-20
33
46
10.22091/cer.2018.3119.1116
"تحلیل IDA "
" تحلیل دینامیکی غیر خطی تاریخچه زمانی "
" قاب خمشی دسته شده "
" قاب خمشی ترکیبی "
" زلزله حوزه نزدیک "
وحیده
شیروانی هرندی
vahideh.shirvani92@gmail.com
1
کارشناسی ارشد مهندسی عمران- زلزله، دانشگاه خوارزمی.
AUTHOR
افشین
مشکوه الدینی
meshkat@khu.ac.ir
2
استادیار، دانشکده فنی و مهندسی، دانشگاه خوارزمی.
LEAD_AUTHOR
علی
معصومی
massumi@khu.ac.ir
3
استاد، دانشکده فنی و مهندسی، دانشگاه خوارزمی.
AUTHOR
[1] Asgarian, B., Sadrinezhad, A. & Alanjari, A. (2010), “Seismic performance evaluation of steel moment resisting frames through incremental dynamic analysis”, Journal of Constructional Steel Research, 66, 178-190.
1
[2] Bahramirad, A., Tehranizadeh, M. & Moshref, A. (2015), “Equating incremental dynamic analysis with static nonlinear analysis at near-field excitation”, Earthquake Engineering and Engineering Vibration, 14(3), 465-476.
2
[3] Shuang, L. & Xie, L. (2007), “Progress and trend on near-field problems in civil engineering”, Acta Seismologica Sinica, 20, 105-11.
3
[4] Azhdarifar, M., Meshkat-Dini, A. & Sarvghad Moghadam, A. (2015), “Assessment of Seismic response of Mid-Rise Steel Buildings with Structural Configuration of Framed Tube Skeletons”, 7th International Conference on Seismology and Earthquake Engineering (SEE7), Tehran, Iran.
4
[5] Gaur, H. & Goliya, R.K. (2015), “Mitigating shear lag in tall building”, International Journal of Advanced Structural Engineering, 7, 269-279.
5
[6] Movahed, H., Meshkat-Dini, A. & Tehranizadeh, M. (2014), “Seismic evaluation of steel special moment resisting frames affected by pulse type ground motions”, Asian Journal of Civil Engineering (BHRC), 15, 575-585.
6
[7] Narayan, S., Shrimali, M.K., Bharti, S.D. & Datta, T.K. (2018), “Collapse of damaged steel building frames because of earthquakes”, Journal of Performance of Constructed Facilities (ASCE), 32(1). https://doi.org/10.1061/(ASCE)CF.1943-5509.0001125
7
[8] Han, S.W., Moon, K.H. & Ha, S.J. (2015), “Seismic performance of high rise intermediate steel moment frames according to rotation capacity of moment connections”, International Journal of High Rise Buildings, 4(1), 45-55.
8
[9] Kalkan, E. & Kunath, S. (2006), “Effects of fling step and forward directivity on seismic response of buildings”, Earthquake Spectra, 22(2), 367-390.
9
[10] Krishnan, S. (2007), “Case studies of damage to 19‐storey irregular steel moment‐frame buildings under near‐source ground motion”, Earthquake Engineering and Structural Dynamics, 36(7), 861-885.
10
[11] Sehhati, R., Rodriguez-Marek, A., ElGawady, M. & Cofer W.F. (2011), “Effects of near-fault ground motions and equivalent pulses on multi-story structures”, Engineering Structures, 33, 767-779.
11
[12] Ghahari, F. & Khaloo, R. (2013), “Considering rupture directivity effects, which structures should be named long-period buildings?”, The Structural Design of Tall and Special Buildings, 22, 165–178.
12
[13] Tajmir Riahi, H., Amouzegar, H. & Ale-Saheb Fosoul, S. (2015), “Comparative study of seismic structural response to real and spectrum matched ground motions”, Scientia Iranica, 22, 92-106.
13
[14] PEER Ground Motion Database, http://peer.berkeley.edu/
14
[15] National Building Regulations. (2013), “Part 6: Applied loads on buildings”, Ministry of Roads and Urban Development, Deputy for housing and construction, Tehran, Iran.
15
[16] Shirvani Harandi, V. (2017), The effect of behavior coefficient on seismic demand of 3D moment frame under strong ground motion. Thesis of Master. Kharazmi University.
16
[17] National Building Regulations. (2013), “Part 10: Design and Construction of Steel Buildings”, Ministry of Roads and Urban Development, Deputy for housing and construction, Tehran, Iran
17
[18] Federal Energy Management Agency (FEMA). (1998), “Prestandard and Commentary for the Seismic Rehabilitation of Buildings: FEMA 356”, Createspace Independent Publication
18
[19] FEMA 440. (2005), “Improvement of Nonlinear Static Seismic Analysis Procedures”, Applied Technology Council (ATC-55 Project).
19
[20] SAP 2000, Structural Analysis Program, Computer and Structures; Berkeley.
20
[21] Iranian Code of Practice for Seismic Resistant Design of Buildings (Standard no. 2800). (2014). 4th Edition, Building & Housing Research Center, Tehran, Iran.
21
[22] Poursha, M. & Samarin, E.T. (2015), “The modified and extended upper-bound (UB) pushover method for the multi-mode pushover analysis of unsymmetric-plan tall buildings”, Soil Dynamics and Earthquake Engineering, 71, 114-127.
22
[23] Eghbali, M., Ghodrati Amiri, Gh. & Yaghmaei Sabegh, S. (2012). “Comparison approximate and accurate methods of evaluating seismic increasingly dynamic analysis of steel moment frames”, Journal of Structure & Steel, 8(11), 63-82.
23
[24] Vamvatsicos, D. & Cornell, CA. (2004), “Applied incremental dynamic analysis”, Earthquake Spectra, 20(2), 523-553.
24
ORIGINAL_ARTICLE
مدلسازی رفتار تیر پیوند به منظور ارزیابی عملکرد آن مطابق FEMA 356 و محاسبه تغییرمکان هدف سطوح عملکرد
وجود تیر پیوند در قابهای مهاربندی واگرا مهمترین عامل تفاوت رفتاری این قاب با سایر سیستمهای سازهای، است. به همین دلیل، مدلسازی رفتار تیر پیوند اهمیت بسیاری دارد. مطابق آییننامه FEMA 356 برای ارزیابی عملکرد تیر پیوند در تمام محدودههای رفتاری آن، نیاز به چرخش خمیری مفاصل خمیری است. در بسیاری از مطالعات، برای مدلسازی تیر پیوند، در محل تشکیل مفصل خمیری، دو مفصل خمشی و برشی متمرکز را به صورت همزمان مدل میکنند. در این روش، در صورت حاکم شدن رفتار برشی در تیر پیوند، دورانی در دو طرف مفصل خمیری به وجود نمیآید. به همین دلیل، نمیتوان به مدلسازی رفتار تعمیمیافته تیر پیوند و ارزیابی عملکردی آن مطابق آییننامه FEMA 356، پرداخت. در این مقاله روش جدیدی برای مدلسازی رفتار تیر پیوند ارائه شده است. طبق این روش، در محل تشکیل مفصل خمیری، تنها یک مفصل خمیری خمشی مدل میشود و رفتار آن به گونهای تعیین میگردد که معادل رفتار تیر پیوند باشد. علاوه بر ارائه روش جدید مدلسازی تیر پیوند، فرآیند محاسبه تغییرمکان هدف هر سطح عملکرد نیز در این مقاله شرح داده میشود. به منظور مدلسازی و تحلیل استاتیکی غیرخطی از نرمافزار OpenSees استفاده شده است. در انتها، برای صحتسنجی فرآیند محاسبه تغییرمکان هدف هر سطح عملکرد و روش مدلسازی ارائه شده، نتایج حاصل از تحلیل استاتیکی غیرخطی یک قاب مهاربندی واگرای فولادی دوبعدی ارائه گردیده و با نتایج نرمافزار SAP2000 مقایسه شده است. مقایسه نتایج، صحت مدلسازی و فرآیند محاسبه تغییرمکان هدف را تأیید میکند.
https://cer.qom.ac.ir/article_1101_b063c1e78611b8594835b1956875f442.pdf
2019-02-20
47
60
10.22091/cer.2018.3193.1118
تیر پیوند
تحلیل استاتیکی غیرخطی
مدلسازی
ارزیابی عملکرد سازه
محمد علی
فتحعلی
malifathali@gmail.com
1
گروه مهندسی عمران، دانشکده فنی و مهندسی، دانشگاه قم
AUTHOR
سید روح الله
حسینی واعظ
hoseinivaez@qom.ac.ir
2
گروه مهندسی عمران، دانشکده فنی و مهندسی، دانشگاه قم
LEAD_AUTHOR
احسان
دهقانی
eng_dehghani@yahoo.com
3
گروه مهندسی عمران، دانشکده فنی و مهندسی، دانشگاه قم
AUTHOR
[1] Rides, J.M. & Popov, E.P. (1994), “Inelastic Link Element for EBF Seismic Analysis”, Journal of Structural Engineering, 120(2), 441-463.
1
[2] Ramadan, T. & Ghobarah, A. (1995), “Analytical Model for Shear-Link Behavior”, Journal of Structural Engineering, 121(11), 1574-1580.
2
[3] Richards, P.W. & Uang, C.-M. (2006), “Testing Protocol for Short Links in Eccentrically Braced Frames”, Journal of Structural Engineering, 132(8), 1183-1191.
3
[4] Özhendekci, D. & Özhendekci, N. (2008), “Effects of the frame geometry on the weight and inelastic behaviour of eccentrically braced chevron steel frames”, Journal of Constructional Steel Research, 64(3), 326-343.
4
[5] Mohebkhah, A. & Farahani, S. (2016), “Seismic Behavior of Direct Displacement-based Designed Eccentrically Braced Frames”, International Journal of Engineering-Transactions C: Aspects, 29(6), 752.
5
[6] Hasan, R., Xu, L. & Grierson, D.E. (2002), “Push-over analysis for performance-based seismic design”, Computers & Structures, 80(31), 2483-2493.
6
[7] Gong, Y., Xu, L. & Grierson, D.E. (2005), “Performance-based design sensitivity analysis of steel moment frames under earthquake loading”, International Journal for Numerical Methods in Engineering, 63(9), 1229-1249.
7
[8] Grierson, D.E., Gong, Y. & Xu, L. (2006), “Optimal performance-based seismic design using modal pushover analysis”, Journal of Earthquake Engineering, 10(01), 73-96.
8
[9] Kaveh, A. & Nasrollahi, A. (2014), “Performance-based seismic design of steel frames utilizing charged system search optimization”, Applied Soft Computing, 22, 213-221.
9
[10] Ganzerli, S., Pantelides, C.P. & Reaveley, L.D. (2000), “Performance-based design using structural optimization”, Earthquake Engineering & Structural Dynamics, 29(11), 1677-1690.
10
[11] Liu, M., Burns, S.A. & Wen, Y.K. (2005), “Multiobjective optimization for performance-based seismic design of steel moment frame structures”, Earthquake Engineering & Structural Dynamics, 34(3), 289-306.
11
[12] Gholizadeh, S., Kamyab, R. & Dadashi, H. (2013), “Performance-based design optimization of steel moment frames”, Int J Optim Civil Eng, 3, 327-343.
12
[13] FEMA-356 (2000). “Prestandard and commentary for the seismic rehabilitation of buildings” Washington, DC: Federal Emergency Management Agency.
13
[14] Ibarra, L.F. & Krawinkler, H. (2005). “Global collapse of frame structures under seismic excitations” Stanford, CA: The John A. Blume Earthquake Engineering Center, Stanford University.
14
[15] Chao, S.-H. & Goel, S.C. (2006), “Performance-based seismic design of eccentrically braced frames using target drift and yield mechanism as performance criteria”, Engineering Journal-American Institute of Steel Construction Inc, 43(3), 173-200.
15
ORIGINAL_ARTICLE
تحلیل رفتار حرارتی و شیمیایی قیر اصلاح شده با استفاده از مواد ضایعاتی
در این مقاله، به تحلیل رفتار حرارتی قیر اصلاح شده با استفاده از پلاستیکهای بازیافتی و پودر لاستیک ضایعاتی پرداخته شده است. در ابتدا بهکمک تحلیل حرارتی، رفتار مواد با افزایش دما بررسی شده که مهمترین آنها تحلیل حرارتی (TGA) وگرماسنجی افتراقی (DSC) بر روی پلاستیکهای بازیافتی، قیر اصلاح شده و پایه میباشد. قیر اصلاح شده با پلاستیکهای بازیافتی عملکرد بهتری به لحاظ خصوصیات حرارتی دارد. در انتها آزمایش FTIR جهت تعیین ساختار ترکیبات بر روی قیر پایه، قیراصلاح شده و پلاستیکهای بازیافتی انجام شد و مشاهده گردید که اصلاح قیر با پلاستیکهای بازیافتی از نوع فیزیکی میباشد و واکنش شیمیایی رخ نمیدهد. در این مقاله، به تحلیل رفتار حرارتی قیر اصلاح شده با استفاده از پلاستیکهای بازیافتی و پودر لاستیک ضایعاتی پرداخته شده است. در ابتدا بهکمک تحلیل حرارتی، رفتار مواد با افزایش دما بررسی شده که مهمترین آنها تحلیل حرارتی (TGA) وگرماسنجی افتراقی (DSC) بر روی پلاستیکهای بازیافتی، قیر اصلاح شده و پایه میباشد. قیر اصلاح شده با پلاستیکهای بازیافتی عملکرد بهتری به لحاظ خصوصیات حرارتی دارد. در انتها آزمایشFTIR جهت تعیین ساختار ترکیبات بر روی قیر پایه، قیراصلاح شده و پلاستیکهای بازیافتی انجام شد و مشاهده گردید که اصلاح قیر با پلاستیکهای بازیافتی از نوع فیزیکی میباشد و واکنش شیمیایی رخ نمیدهد.
https://cer.qom.ac.ir/article_1293_745947b2a92990197a43ae5e677221eb.pdf
2019-02-20
61
69
10.22091/cer.2018.2480.1101
تحلیل حرارتی
پلاستیک بازیافتی
قیر
پودرلاستیک
حسین
زنجیرانی فراهانی
farahani1404@ut.ac.ir
1
دانشجوی دکتری تخصصی، دانشکده مهندسی عمران، دانشگاه تهران.
AUTHOR
مسعود
پلاسی
mpalas@ut.ac.ir
2
دانشیار، دانشکده مهندسی عمران، دانشگاه تهران.
LEAD_AUTHOR
جواد
نعمتی
omidnemati103@gmail.com
3
کارشناسی ارشد دانشکده مهندسی عمران و مدیریت، دانشگاه صنعتی پویش.
AUTHOR
[1] Soudani, K., Cerezo, V., & Haddadi, S. (2016). “Rheological characterization of bitumen modified with waste nitrile rubber (NBR)”, Construction and Building Materials, 104, 126-133.
1
[2] Zhang, F., & Hu, C. (2016). “The research for crumb rubber/waste plastic compound modified asphalt”, Journal of Thermal Analysis and Calorimetry, 124(2), 729-741.
2
[3] Wang, S., Wang, Q., Wu, X., & Zhang, Y. (2015). “Asphalt modified by thermoplastic elastomer based on recycled rubber”, Construction and Building Materials, 93, 678-684.
3
[4] Fang, C., Wu, C., Hu, J., Yu, R., Zhang, Z., Nie, L., & Mi, X. (2014). “Pavement properties of asphalt modified with packaging‐waste polyethylene”, Journal of vinyl and additive technology, 20(1), 31-35.
4
[5] Giovanni, P., Stefano, B., Dario, B., Jiri, S., & Ludovit, Z. (2005). “Asphaltmodification with different polyethylene-based polymers”, EurPolym J, 41, 2831-44.
5
[6] Ouyang, C., Gao, Q., Shi, Y., & Shan, X. (2012). “Compatibilizer in waste tire powder and low‐density polyethylene blends and the blends modified asphalt”, Journal of Applied Polymer Science, 123(1), 485-492.
6
[7] Navarro, F. J., Partal, P., García-Morales, M., Martín-Alfonso, M. J., Martinez-Boza, F., Gallegos, C., & Diogo, A. C. (2009). “Bitumen modification with reactive and non-reactive (virgin and recycled) polymers: a comparative analysis”, Journal of Industrial and Engineering Chemistry, 15(4), 458-464.
7
[8] Costa, L. M., Hugo, M. R., Silva, D., Oliveira, J. R., & Fernandes, S. R. (2013). “Incorporation of waste plastic in asphalt binders to improve their performance in the pavement”, International journal of pavement research and technology, 6(4), 457-464.
8
[9] Gonzalez, O., Munoz, M. E., Santamarıa, A., Garcıa-Morales, M., Navarro, F. J., & Partal, P. (2004). “Rheology and stability of bitumen/EVA blends”, European Polymer Journal, 40(10), 2365-2372.
9
[10] Padhan, R. K., Gupta, A. A., Badoni, R. P., & Bhatnagar, A. K. (2013). “Poly (ethylene terephthalate) waste derived chemicals as an antistripping additive for bitumen–An environment friendly approach for disposal of environmentally hazardous material”, Polymer degradation and stability, 98(12), 2592-2601.
10
[11] Pasandín, A. R., Pérez, I., Ramírez, A., & Cano, M. M. (2016). “Moisture damage resistance of hot-mix asphalt made with paper industry wastes as filler”, Journal of cleaner production, 112, 853-862.
11
[12] Gómez-Meijide, B., Pérez, I., & Pasandín, A. R. (2016). “Recycled construction and demolition waste in cold asphalt mixtures: evolutionary properties”, Journal of Cleaner Production, 112, 588-598.
12
[13] Fang, C., Liu, P., Yu, R., & Liu, X. (2014). “Preparation process to affect stability in waste polyethylene-modified bitumen”, Construction and Building Materials, 54, 320-325.
13
[14] Tóth, B., Varga, C., & Bartha, L. (2015). “Olefin–maleic-anhydride copolymer based additives: A novel approach for compatibilizing blends of waste polyethylene and crumb rubber”, Waste management, 38, 65-71.
14
[15] Yan, K., Xu, H., & You, L. (2015). “Rheological properties of asphalts modified by waste tire rubber and reclaimed low density polyethylene”, Construction and Building Materials, 83, 143-149.
15
[16] Goolestani Fard, F., Bahrevar, M. A., & Salahi, E. (2018). Material Characterization and analysis Method, Iran University Science and Technology.
16
ORIGINAL_ARTICLE
ارزیابی آسیبپذیری لرزهای اسکلههای شمع و عرشه فلزی در اثر سالخوردگی ناشی از خوردگی سازه
اسکلههای شمع و عرشهی فولادی در مقابل خوردگی و فرسایش بسیار آسیبپذیر نشان دادهاند، بخصوص در محیط مرطوب ساحلی خلیج فارس که دارای یون کلرید فراوانی میباشد. از طرفی با توجه به اینکه کشور ما در منطقه لرزهخیزی قرار دارد باید توجه ویژهای به ساخت سازههای با اهمیت بالا داشت تا در مقابل این پدیده طبیعی قابلیت سرویسدهی خود را از دست ندهند. پس با شناخت میزان آسیبپذیری این سازهها در مقابل خوردگی میتوان میزان آسیبهای وارده در مقابل زلزله را ارزیابی کرده و در پروسه طراحی و یا در روشهای نگهداری این تاثیرات را در نظر گرفته و گامهایی در این راستا برداشت تا میزان مقاومت سازه در مقابل بارهای دینامیکی و استاتیکی وارده از حمله بار زلزله در طول عمر بهرهبرداری سازه از حد مجاز تجاوز نکرده و سازه قابل سرویسدهی باشد. در این مقاله از یک نوع اسکله شمع و عرشه فولادی رایج در خلیجفارس برای مدلسازی سه بعدی در نرمافزار SAP2000 استفاده شده است. پنج مدل از اسکله در سنین 0، 5/12، 25، 5/37 و 50 سال پس از ساخت سازه مدلسازی شدند و برای بررسی پاسخ لرزهای مدلها از تحلیل دینامیکی فزاینده که شامل هشت رکورد زلزله در هفت مقیاس مختلف میباشد، استفاده شد. در نهایت با کمک معیارهای خرابیای که از تحلیل پوشآور استخراج گردید، منحنیهای شکنندگی اسکله در سه حالت سرویسدهی، تعمیرپذیری و نزدیک فروپاشی ارائه شدند. بعد از انجام تحلیلها و مشاهده نتایج این نتیجه بدست آمد که سالخوردگی موجب تغییر پاسخ لرزهای و منحنیهای IDA اسکله و افزایش آسیبپذیری سازه میشود.
https://cer.qom.ac.ir/article_1311_c8aa9f6ffb6f616e6f2350e0340b1379.pdf
2019-02-20
71
79
10.22091/cer.2019.3738.1135
اسکله شمع و عرشه
خوردگی
شمعهای فلزی
رفتار لرزهای
سالخوردگی
روح اله
امیرآبادی
r.amirabadi@qom.ac.ir
1
گروه مهندسی عمران، دانشکده فنی و مهندسی، دانشگاه قم، قم، ایران
LEAD_AUTHOR
حسین
اربابی
arbabi.hossein@yahoo.com
2
کارشناسی ارشد مهندسی سواحل، بنادر و سازههای دریایی، دانشکده فنی مهندسی، دانشگاه قم.
AUTHOR
ابوالفضل
آرزومند
saleh.mahdi@outlook.com
3
مربی، دانشکده فنی مهندسی، دانشگاه قم.
AUTHOR
مهدی
صالح
m.saleh@stu.qom.ac.ir
4
کارشناسی ارشد مهندسی سواحل، بنادر و سازههای دریایی، گروه مهندسی عمران، دانشکده فنی مهندسی، دانشگاه قم.
AUTHOR
[1] Soleimani, K., Ketabdari, M., & Ebadi Manesh, M. (2015). “The system of piles and decks and the development of its use in the coastal areas”, 1St National Congress on Construction Engineering and Projects Assessment (in Persian).
1
[2] Ebrahimi, A., Baharvandi Askar, M., Deilami, M., & Chegini, V. (2016). “Effect of destruction and corrosion in marine and coastal structures of hot and humid areas”, International Conference on Civil and Urban Architecture (in Persian).
2
[3] Vamvatsikos, D., & Cornell, C. A. (2002). “Incremental dynamic analysis”, Earthquake Engineering & Structural Dynamics, 31(3), 491-514.
3
[4] Sayadi, H., Akbarpour Nik Ghalb Rashti, A., & Rabieefar, H. (2016). “Investigation of corrosion of reinforcement in concrete structures on the southern coast of Iran”, 2nd International Conference on Research in Science and Technology (in Persian).
4
[5] Farhadi, H., Gardandeh, A., & Jafari Abdolmaleki, M. (2016). “The effect of corrosion caused by chloride ions in reinforcement on the bearing capacity of concrete members in marine environments”, Second National Conference on Architecture, Civil Engineering & Urban Modern Development ( in Persian).
5
[6] Dashti Naser Abadi, H., & Ranjbar, R. (2015). “Investigation of the Effects of Chloride, Sulfate, and Carbonation on Structures in Marine Environment”, National Conference on Engineering Science, New Ideas, Tonekabon (in Persian).
6
[7] Dang, V. H., & François, R. (2014). “Prediction of ductility factor of corroded reinforced concrete beams exposed to long term aging in chloride environment”, Cement and Concrete Composites, 53, 136-147.
7
[8] ICHII, K., IAI, S., SATO, Y., & LIU, H. (2002). “Seismic performance evaluation charts for gravity type quay walls”, Structural Engineering/Earthquake Engineering, 19(1), 21s-31s.
8
[9] Kadkeri, K., & Pitilkis, K. (2010). “Seismi analysis and fragility curves of gravity waterfront structures”, In Fifth International Conference on Recent Advanced in Geotechnical Earthquake Engineering and Soil Dynamics and Symposium in Honor of Professor I.M. Idriss, San Diego, CA, Paper No. 6.04a.
9
[10] Ko, Y.-Y., Yang, H.-H., & Chen, C.H. (2010). “Seismic fragility analysis for sheet pile wharves – Case study of the Hualien harbor in Taiwan”, In Fifth International Conference on Recent Advanced in Geotechnical Earthquake Engineering and Soil Dynamics and Symposium in Honor of Professor I. M. Idriss, San Diego, CA, Paper No. 6.05a.
10
[11] Chiou, J. S., Chiang, C. H., Yang, H. H., & Hsu, S. Y. (2011). “Developing fragility curves for a pile-supported wharf”, Soil Dynamics and Earthquake Engineering, 31(5-6), 830-840.
11
[12] Ghosh, J., & Padgett, J. E. (2010). “Aging considerations in the development of time-dependent seismic fragility curves”, Journal of Structural Engineering, 136(12), 1497-1511.
12
[13] Karapetrou, S., Fotopoulou, S., & Pitilakis, K. (2013). “Consideration of aging effects on the time-dependent seismic vulnerability assessment of RC buildings”, In Vienna congress on recent advances in earthquake engineering and structural dynamics.
13
[14] Soltani, K. (2009). “Linear and nonlinear analysis with SAP2000 software”, (in Persian).
14
[15] Recommended Practice for Planning, Designing and Constructing Fixed Offshore Platforms – Working Stress Design, API Recommended Practice 2A-WSD (RP 2A-WSD) Twenty-First Edition, December 2000.
15
[16] Amirabadi, R., Bargi, K., Dolatshahi Piroz, M., Heidary Torkamani, H., & Mccullough, N. (2014). “Determination of optimal probabilistic seismic demand models for pile-supported wharves”, Structure and Infrastructure Engineering, 10(9), 1119-1145.
16