@article { author = {Farzin, Saeed and Karami, Hojjat and Sabetii, Parham and Nayyer, Shahab}, title = {Determination of the outflow proportion of bottom intake with trash rack by controlling the amount of opening between racks with computational fluid dynamics approach}, journal = {Civil Infrastructure Researches}, volume = {3}, number = {2}, pages = {15-24}, year = {2018}, publisher = {University of Qom}, issn = {2783-140X}, eissn = {2783-140X}, doi = {10.22091/cer.2017.1613.1066}, abstract = {Tyrolean weir has a hydraulic trash rack that is installed through the river stream for water-intake. In this paper, hydraulic flow of this structure is simulated three-dimensionally, and its perfor-mance is studied through a change of the amount of the opening between trash racks. The modeling and analysis is done with AN-SYS CFX 16.0. The accuracy of numerical model and the results are confirmed by comparing the parameters such as discharge of the weir output and wetted trash rack length with models and re-sults of the prior researchers. To generalize the results, Tyrolean weir is investigated in cases of three different input discharge and three different inclinations of the trash rack from the horizon (0%, 10% and 20%). The results show that increasing the inflow in a given inclination of the weir surface, less part of the water-intake is as a slip of water over the network and pouring of that in the weir. For instance, 35% opening is required to water-intake of 50% of maximum input discharge of 12 lit/ (s.m).}, keywords = {Bottom intake,computational fluid dynamics,finite volume method,Tyrolean weir,3D modeling}, title_fa = {تعیین سهم دبی خروجی آبگیر تحتانی دارای شبکه آشغال‌گیر با کنترل میزان بازشدگی سطح آبگیر به روش دینامیک سیالات محاسباتی}, abstract_fa = {آبگیر تحتانی دارای شبکه آشغالگیر سازهای هیدرولیکی است که برای آبگیری در مسیر رودخانه نصب میشود. در این پژوهش هیدرولیک جریان در این سازه بهصورت سهبعدی شبیهسازی و عملکرد این سازه با تغییر میزان بازشدگی شبکهی آشغالگیر مطالعه شده است. مدلسازی و تحلیل در نرمافزار Ansys CFX 16.0 انجام شد. درستی مدل عددی و نتایج بهدستآمده از تحلیل آن، با مقایسه پارامترهایی نظیر دبی خروجی آبگیر و طول خیس شده شبکه آشغالگیر با مدلها و نتایج آزمایشگاهی محققین پیشین تطابق داده شد. در ادامه با تغییر میزان بازشدگی شبکه آشغالگیر و ثابت نگهداشتن خصوصیات دیگر سهم آبگیری از بالادست رودخانه تعیین شد. بهمنظور تعمیم نتایج، آبگیر تحتانی با سه دبی ورودی متفاوت و نیز سه شیب متفاوت شبکه آشغالگیر نسبت به افق (0، 10 و 20%)، مورد تحلیل قرار گرفت. نتایج بهدستآمده نشان میدهد با افزایش دبی در یک شیب خاص سطح آبگیر، بخش کمتری از آبگیری بهصورت لغزش آب روی شبکه و فروریختن آن در آبگیر است.}, keywords_fa = {آبگیر تحتانی,دینامیک سیالات محاسباتی,روش احجام محدود,مدل‌سازی سه‌بعدی,Tyrolean weir}, url = {https://cer.qom.ac.ir/article_871.html}, eprint = {https://cer.qom.ac.ir/article_871_7ddab7b0d9c0ec5f9ed664d2e659ebed.pdf} }